Information on Flexible Horse Shoes in Oregon
Horse Hoof Care - No Hoof, No Horse
Horseshoe Studs, Caulks or Calks are metal devices that are screwed or driven into the bottom of your horse's shoes. By protruding from the bottom of the shoe, they can help to provide traction over muddy or deep footing, such as sand, and help your horse jump more confidently.
Before using studs, holes are "tapped," or drilled, into both heels, and sometimes the toes, of the horse's shoe. Obviously the size of the hole must accommodate the stud and generally in the US, farriers will tap a hole that supports a 3/8" diameter stud. Therefore, unless you have a special requirement for a smaller hole, such as a pony with very small feet, you should try to stick with 3/8' studs.
The first time you ride your horse with studs you should fit him with some small road studs and let him walk around unmounted for a while to get used to the new feeling (this does not mean turn him out in a field with studs in - horses should never be turned out in studs!)
Here are some simple rules for using studs. These relate to "screw-in" studs rather than "drive-in" studs because screw-in studs are by far the most commonly used types.
Do's: o ALWAYS use studs in pairs, with one on each side of the hoof.
o ALWAYS use small, blunt studs on the inside of your horse's shoes. A large, pointed stud can injure him.
o ALWAYS put protective leg boots on your horse when riding in studs.
o ALWAYS put studs in just before you will be riding and remove them as soon as possible afterwards.
o ALWAYS use the smallest stud you can, considering the conditions. While slipping is dangerous for your horse, a little slipping is much better than jarring your horse's legs with huge studs. Try to find a stud that allows a little slipping, but not so much that your horse's balance will suffer. Studs should be selected that will sink fully into the ground, otherwise they will unbalance the foot.
o ALWAYS try to have someone help you by holding your horse when you are putting studs in, especially if you will be using a Tee Tap (see below).
o ALWAYS be very careful if you have a horse that is likely to kick out at other horses or people. If you have such a horse, try to limit the amount of time you use studs.
Dont's: o NEVER turn your horse out with studs.
o NEVER leave your horse unattended in a stall with studs.
o NEVER trailer your horse with studs.
o NEVER use studs if your horse is lame.
o NEVER put yourself in a position where a horse with studs in can step on you. It is very easy to break a toe this way, even in riding boots.
Your Stud "Toolkit" Ahead of time, you should assemble the following items:
o A selection of studs. Remember that depending on the footing, you might not use the same studs on the inside and outside of your horse's shoes, or you could use different studs on the front than the back shoes. o A horseshoe nail or some type of flat but pointed "pick" to remove stud plugs. Screwdrivers are generally not suitable as they tend to be too "fat" to fit between the plug and the shoe.
o A stud hole cleaner. This is used to remove any debris from the stud hole. Some people use the horseshoe nail for this, but there are many specially-designed tools that will work faster.
o A tap of some type. This is used to clean and sharpen the edges of the threads your farrier drilled into the stud holes. There are many types on the market. The traditional type is a Tee Tap or T-Tap, so named because it is the shape of the letter "T". Recently round "Safety" Taps have become available on the market. These are safer because if your horse steps down on a Tee Tap it can cause an injury whereas a Safety Tap is less likely to cause a problem because it is flat and shaped like a hoof. There are some self-tapping studs starting to come onto the market that should remove the need for a separate Tap, however it is still a good idea to keep a Tap on hand.
o A wrench. This is used to tighten and then remove the studs. You can use a regular adjustable wrench found in most toolkits, although over time the wrench may wear the edges of your studs, making them difficult to use. There are also a number of special wrenches made specifically for horse studs. Even if you use a purpose-made wrench, it is probably not a bad idea to have an adjustable one too.
o A box to keep everything in one place! Studs have a notorious "homing" instinct and will disappear at the smallest opportunity. If you don't capture them in a box, you will never find them again next time you need them.
o Rags or a small sponge. For removing oil or grease from your studs (assuming you oiled and stored them correctly the last time you used them) Studs are definitely slippery when greasy and will jump on this opportunity as part of their escape plan!The following items are also nice to have: o A magnet for your arm or a magnetic dish. This is useful for keeping steel studs in one place while you work and will reduce the possibility of your studs escaping! o Rubber or cotton plugs or blanks. Most people put plugs in their stud holes when they are not using studs. This keeps the holes clean. There are rubber and cotton plugs and also metal stud blanks. If you use cotton plugs, soak them in oil to prevent the holes rusting. Stud blanks are metal screw-in plugs. If you use these, you will also need a....
o Blank Wrench or Flat-Head Screwdriver. A Blank Wrench is an Allen Key and is inserted into the stud blank to screw the blank in and out of the stud hole. Some stud blanks are designed to be inserted and removed using a Flat Head Screwdriver instead of a Blank Wrench.
o Stud cleaner and lubricant. Your studs will last much longer if you clean and grease them after use. Many people wrap them in an oily rag for storage, or you can use a product such as WD-40. Pretty much anything that repels water will work. There are also specially made stud cleaners available on the market.
Putting Studs in Ideally you should take a lesson from your farrier or trainer before attempting to put studs in yourself. Make sure you and your horse practice at home, until you can put them in and take them out easily, before using them at a competition. If your horse has plugs in his stud holes you will need to remove these first with your horseshoe nail or other implement.
HINT: It is a good idea to take the plugs out, clean the holes and replace the plugs before you leave for a competition. There is nothing more frustrating than not being able to remove a plug when you only have 10 minutes until you should be warming up your horse!Next you will need to clean out the stud hole with whatever tool you have chosen. Make sure that you remove all traces of dirt and debris. Putting studs into dirty stud holes can ruin the threads on your horse's shoes. Then (unless you are using self-tapping studs) you will need to tap the stud hole with a Safety Tap or Tee Tap. Unless you have a very quiet, experienced horse and are experienced with studs, we recommend using a Safety Tap. Basically, you will place the end of the Tap into the stud hole and screw it into the hole. Another benefit of a Safety Tap is that you can't screw the Tap in too far and potentially bruise your horse's hoof, which is possible with a Tee Tap.
HINT: Self-tapping studs are a new option where the stud has a special thread that will clean the threads on your horse's shoes as you insert it. Because they are new, these studs are more expensive than traditional studs, but as long as you don't lose them, they could be a great timesaving investment. Now you can insert the studs. Begin by screwing them in by hand and finally make them nice and tight with your wrench. Be sure that you don't over-tighten them so that you can't undo them after you finish riding!When you are finished riding, remove the studs, plug the holes and store the studs in some form of oily rag or plastic bag with a water repellent - any kind of oil, grease or WD-40 will work. Make sure you keep some rags or a sponge on hand to wipe up the grease! Put your studs back in their box - if you don't they WILL escape!!! And don't forget to have a great ride!
For more information on types of studs and when to use them, please visit www.StudsAndStuff.com
# 1 – What are Nanoflex Horseshoes, and how do they function?
Nanoflex Horseshoes are a shapable polyurethane straight glue on shoe that resembles the natural make-up as well as put on qualities of the hoof. Our footwear are commonly used in performance and also restorative situations as an alternative application with horses that become unresponsive to conventional shoeing techniques.
With their capability to resemble the technician residential or commercial properties of the foot – Nanoflex Horseshoes boost the feature of the hoof, instead of limiting it. This commonly leads to a much more comfortable equine with healthier development.
# 2 – What are the benefits of Nanoflex shoes?
Nanoflex footwear supply several advantages for the steed. Most typically, we listen to customers describing the shoes ability to operate as an all-natural extension of the unguis as the most desirable attribute. The direct glue application together with the shoe’s composition are thought to preserve the regular hoof features of assistance, traction, shock absorption as well as proprioception by bending with the unguis.
In our opinion, traditional adhesive on footwear over long term use tend to reverse the preliminary benefits attained because of the casting nature of an inflexible footwear. In contrast, our observations have found Nanoflex shoes to be successful for long term use and also appear to produce much healthier horn development.
# 3 – How much time will the Nanoflex shoes last?
Nanoflex Horseshoes are created to have the same or comparable life expectancy as typical footwear. We advise shoeing your horse according to the ordinary cycle of 4-6 weeks, based on their personal demands.
# 4 – Are Nanoflex footwear much more costly than conventional shoes?
Yes. The moment it takes to produce our shoes, in addition to the materials as well as craftsmanship required for the application procedure makes Nanoflex Horseshoes a true investment.
# 5 – What makes an equine an excellent prospect for Nanoflex horseshoes?
Under our “Shoes” tab, you will certainly find “Selecting A Candidate” alternative in the drop down menu. If you see this web page you will certainly find a comprehensive description of the 4 main factors we take into consideration before determining if a horse is a Nanoflex prospect.
Name: John Filipelli
Organization: Nanoflex, Inc.
Address: South Florida Trotting Center: 7563 State Road 7, Lake Worth FL 33449, USA
Phone: (954) 857-6337
Find Flexible Horse Shoes in the State of Oregon
Where to find information about Flexible Horse Shoes in Oregon
Types of Horseshoes - Knowing the Different Kinds of Horseshoes
Even if you don't know much about horse riding, you probably know what horseshoes are. Horseshoes are no longer just used to dress the feet of horses. They are now also popular decorations that are even believed to bring good luck to the owners. Technically, horseshoes are U-shaped devices that are used to protect the horse's hooves. To keep them in place, they are usually nailed or glued. The earliest horseshoes were actually made of rawhide. However, this proved to be a too flimsy material that would often get torn when the horse would start to gallop or walk around. Fortunately, today's horseshoes are made of much more durable material that can effectively shield and protect the horse's moves during races and even casual rides. Read on to learn about the different types of horseshoes.
Among all the different types of horseshoes, steel horseshoes are probably the most durable. They are very strong and thick and are the recommended horseshoes for horse events, polo, show jumping and other instances where extra protection is necessary. Tennessee Walkers and other horses that need to do a lot of steeping should also be fitted with steel horseshoes.
If you are looking for horseshoes that are more of the lightweight nature then aluminum is the best material for you. Because of their lightness, aluminum horseshoes are also ideal for racehorses since they can run faster with minimal weight.
When it comes to choosing among the various kinds of horseshoes, it's important to be clear about the kind of horse you have and what activities is he most likely to engage in. If you are looking for horseshoes that can stand the test of time then steel is the right choice. However, if you own a racehorse and you need to maximize his speed then lightweight aluminum is the better choice.
- Alternative To Horseshoes in Oregon
- Horseshoes For Sale in Albany
- Horseshoes For Cutting Horses in Ashland
- Horseshoes For Navicular in Astoria
- Glue On Horse Shoes in Baker City
- Horseshoes For Gaited Horses in Beaverton
- Plastic Horseshoes For Horses in Bend
- Horseshoes For Sale in Canby
- Horseshoes For Race Horses in Central Point
- Horseshoes For Sale in Coos Bay
- Horseshoes For Sale in Cornelius
- Plastic Horseshoes For Horses in Corvallis
- Plastic Horseshoes in Cottage Grove
- Glue On Horseshoes For Laminitis in Dallas
- Urethane Horseshoes in Eagle Point
- Glue On Horseshoes in Eugene
- Horseshoes For Race Horses in Fairview
- Performance Horse Shoes in Florence
- Alternative To Horseshoes in Forest Grove
- Plastic Horseshoes in Gladstone
- Innovative Horseshoes in Grants Pass
- Glue On Horseshoes in Gresham
- Horseshoes On A Horse in Happy Valley
- Horseshoes For Race Horses in Hermiston
- Where To Buy Horseshoes For Horses in Hillsboro
- Horseshoes For Cutting Horses in Hood River
- Horseshoes For Cutting Horses in Independence
- Alternative To Horseshoes in Keizer
- Horseshoes For Race Horses in Klamath Falls
- Horseshoes For Sale in La Grande
- Where To Buy Horseshoes For Horses in Lake Oswego
- Performance Horse Shoes in Lebanon
- Horseshoes For Dressage Horses in Lincoln City
- Horseshoes For Navicular Horses in McMinnville
- Horse Care Supplies in Medford
- Horse Care Supplies in Milton-Freewater
- Innovative Horseshoes in Milwaukie
- New Plastic Horseshoes For Horses in Molalla
- Innovative Horseshoes in Monmouth
- Horseshoes On A Horse in Newberg
- Urethane Horseshoes in Newport
- Horseshoes For Navicular Syndrome in North Bend
- Horseshoes For Foundered Horses in Ontario
- Therapeutic Shoes For Horses in Oregon City
- New Plastic Horseshoes For Horses in Pendleton
- Innovative Horseshoes in Portland
- Glue On Horseshoes For Laminitis in Prineville
- Flexible Horse Shoes in Redmond
- Glue On Horse Shoes in Roseburg
- Horseshoes On A Horse in Salem
- Where To Buy Horseshoes For Horses in Sandy
- Flexible Horse Shoes in Sherwood
- Glue On Horse Shoes in Silverton
- Horseshoes For Foundered Horses in Springfield
- Horseshoes For Navicular Horses in St. Helens
- Horseshoes For Race Horses in Stayton
- New Plastic Horseshoes For Horses in Sutherlin
- Plastic Horseshoes in Sweet Home
- Flexible Horseshoes in The Dalles
- Buy Horseshoes in Tigard
- Therapeutic Shoes For Horses in Troutdale
- Innovative Horseshoes in Tualatin
- Plastic Horseshoes in Umatilla
- Horseshoes For Cutting Horses in West Linn
- Horseshoes For Navicular in Wilsonville
- Horseshoes For Foundered Horses in Woodburn