Common Concerns About Horseshoes For Draft Horses Here in League City
# 1 – Aren’t Nanoflex horseshoe footwear slippery?
No matter just how a steed is shod, there is always danger connected with surfaces such as asphalt, wet turf as well as other examples of bad footing. That claimed, our shoes are commonly made use of turf training courses and also grass rings in the performance globe. In fact, several of our styles have stud attributes planned particularly for higher grip. In comparison, we have actually found Nanoflex footwear to be no more slippery than traditional footwear.
# 2 – I can see steel on the toe of my Nanoflex Horseshoes – is this typical?
The majority of our footwear comprises a wear plate in the toe region to assist eliminate excess wear on the shoe. If you look closely at most lightweight aluminum brands of footwear – you will certainly see the exact same thing. As your steed begins to use his shoe – the plate will certainly end up being extra visible. This attribute is an expected process within the shoeing cycle and is considered regular.
# 3 – Will Nanoflex Horseshoes fall off?
While all shoes have the possible ahead off, the success rate of our shoes remaining on rests entirely on the application process. As a matter of fact, with the right method and application – Nanoflex Horseshoes can be perfect for steeds with a tendency to draw footwear & will remain on also, otherwise much better than conventional footwear.
# 4 – Will my steed have the ability to put on Nanoflex footwear long-term?
Absolutely. While Nanoflex Horseshoes are not intended to be a long-term shoeing choice, they do use lots of advantages to the health and wellness of the steed’s foot. Many customers, as well as farriers, concur that they see increased horn development, structural integrity as well as sole depth after consistently utilizing Nanoflex.
# 5 – Can I shoe my steed with Nanoflex Horseshoes and also typical footwear concurrently?
Yes, actually it is common to have a horse putting on Nanoflex ahead & standard shoes in the back. What is important to remember is that every horse has various needs. What may function well for one steed might not function well for one more. Nanoflex Horseshoes are intended to be made use of in a selection of combinations that benefit each specific steed.
# 6 – When I footwear my equine in Nanoflex Horseshoes will I be able to switch back to traditional shoeing methods?
Most of the time, absolutely. Nanoflex Horseshoes are usually utilized as a way to an end to attain a particular therapeutic or affordable goal. Depending on your horse’s specific demands – it is fairly possible that your equine can go back to traditional shoeing methods. Periodically, we do have horses that grow in Nanoflex shoes, and also end up coming to be several of our long term consumers.
# 7 – If I can not locate the dimension or footwear I need for my equine, may I position a custom-made order/request?
Of our offered footwear, we provide a plethora of alternatives to best fulfill the requirements of as numerous horses as possible. Occasionally we do fulfill custom-made orders, however, we require payment for the store time and also products needed to develop specific modifications for the footwear. If your demand matches a personalized order we have actually had in the past, we may currently have the mold and mildew for it. If your request does not match any of our previous orders & is possible – creating a brand-new original footwear calls for considerably greater investment.
# 8 – I observed that not all Nanoflex Horseshoes coincide shade of brownish-yellow color – what does this mean?
Our footwear is made from raw material as well as these sets can sometimes have various shades. While their shade may not be identical, all of our shoes are of the very same top quality.
~ APPLYING NANOFLEX SHOES ~
# 1 – Why do you recommend that I utilize your kind of glue and sticky items for applying Nanoflex Horseshoes?
The what’s what is that we are not as concerned about brand name as we are about the quality of the product and also typically made use of. In time, as well as after much trial and error we have actually established a really details application procedure making use of products that we are positive in. We’ve had one of the most success with long-term bonds making use of a methacrylate blend glue with our unguis sealer – and also highly suggest using this type of glue in conjunction with our application directions for the best end results.
# 2 – Why do I require to blink dry the foot prior to applying Nanoflex footwear?
While it may really feel completely dry to the touch, the unguis is practically thought about wet after a fresh trim. If any kind of part of the hoof consists of wetness at the time of gluing, the sticky residential properties of the bond will be compromised. This is why we suggest flashing drying out the unguis with a torch before gluing on the footwear. To discover more in-depth directions, visit our Application Process web page to view a video tutorial as well as read our instructional short article.
# 3 – Can I use adhesive on footwear in weather extremes?
Yes, the secret is selecting the appropriate sort of adhesive, handling temperature of your adhesive and regulating your dampness degrees in the foot.
We like using fast set glue – nevertheless, if you are using glue on shoes for the very first time, the slow-moving collection will certainly give you a bigger time gap to prepare & use.
When trying to regulate the temperature level of your glue, attempt to stay clear of severe modifications. In cold weather – store your glue in a space temperature level environment & maintain your adhesive on a hot pad while you are preparing your foot. In heat extremes, saving your adhesive in a refrigerator & packaging your glue in a cooler will offer you good temperature level control also.
Finally, constantly remember to blink completely dry the foot using a lantern prior to applying the footwear. After a fresh trim, the steed’s hoof is taken into consideration wet. By flash drying out, you will certainly produce a suitable surface for your adhesive to bond to.
If you are mindful of these 3 things and also combine it with the proper application process you can get very good results shoeing in all weather condition kinds.
# 4 – What options do I have for shaping Nanoflex footwear?
Unlike typical footwear, our Nanoflex Horseshoes are made with an enveloped cable to allow for shaping. Additionally, our shoes are available in numerous toe sizes and alteration options to adjust to breed & discipline certain requirements.
That said, we do not encourage utilizing a hammer to shape Nanoflex Horseshoes. Our personal choice is to utilize the completion of a hoof jack to form the footwear. By placing the branch of the footwear that you are intending to form into the top of the aluminum blog post of your unguis jack (after eliminating the rubber cap that your hoof rests on) you are able to flex the shoe. By exaggerating the bend, you are normally able to accomplish the degree of change you are seeking.
If you require more support picking the appropriate footwear for your equine or creating the perfect fit, please call anytime for advice. In the meantime, be sure to sign in to see our upcoming instructional videos!
# 5 – Can Nanoflex Horseshoes be nailed on?
Yes and No, Nanoflex shoes are glue-able and nail-able. Because of the nature of their style, Nanoflex shoes can be used utilizing direct glue. If you were to toenail on a Nanoflex shoe, the all-natural flexibility of the polyurethane could produce enough excess motion to induce tension on the nails, therefore resulting in damages to the unguis wall surface.
# 6 – Exactly how do you get rid of a Nanoflex Horseshoe?
Our best recommendations are to deal with a Nanoflex shoe like an extension of the horse’s foot and also to cut it off. Nevertheless, bear in mind the glue to see to it you are not participating in the unguis off with your footwear.
# 7 – Can Nanoflex shoes be reset?
Nanoflex Horseshoes are implied to put on according to the steed’s natural footfall and are not intended to be utilized for greater than one shoeing. Depending on the discipline of your equine & the surfaces he/she is ridden on, the footwear will wear at different rates. We extremely suggest that you preserve your horse’s shoeing routine, and also do not extend the shoeing cycle.
# 8 – Exactly how do I locate even more information about the adhesive on the procedure?
We have additional sources for discovering our glue on the procedure on our web site under the “Horseshoes for Horses” tab. If you choose “Footwear” the fall food selection will supply you an “Application Process” choice. That page will certainly provide you a training video clip, detailed post and a web link to our Quarter Crack video clip. If those resources do not give you the responses you are seeking – please feel free to give us a call anytime. We are greater than pleased to assist you with any kind of questions about horseshoes or worries you might have.
Name: John Filipelli
Organization: Nanoflex, Inc.
Address: South Florida Trotting Center: 7563 State Road 7, Lake Worth FL 33449, USA
Phone: (954) 857-6337
Where to Find Horseshoes For Draft Horses in League City
League City, Texas
Horseshoes and the Trims They Bring - HorseShoe Manufactures Set the Trend, Our Horses Pay the Price
Some recent and not so recent research has prompted my writing this article. Over the past two decades horseshoe manufactures have been inadvertently or perhaps purposely setting trends that could be proving to be detrimental to even those horses that go barefoot. You read it right; trend set by horseshoe manufacturers could have an effect on your barefoot horse. Not through their production of horseshoes, but rather by the style of shoes that they produce.
Thinking back to when I began as a farrier almost 25 years ago, I can remember making my weekly pilgrimage to the local farriers supply store to purchase the required horseshoe inventory to stock my shoeing truck for the week. I would calculate the number of pairs and the sizes I would need for the coming weeks' work. As my business increased, it became more difficult finding the time to make those weekly trips, and I soon found myself buying inventory for the month.
Establishing a horseshoe inventory was pretty straightforward. I, like most farriers at that time, would buy fullered, punched keg shoes by the case, in the most common sizes 00, 0, 1, 2, 3. The term keg shoe defines the most common of machine made horseshoes. The keg shoe comes in a generic oval shape and was called the "keg shoe" because they were originally shipped in kegs (barrels). This type of shoe almost always needed to be shaped to fit the hind or front foot of the horse. All too often the hurried farrier simply would spread, or close the shoe to fit a foot, and then shape the foot to the shoe., rather than the shoe to the foot.
This practice was likely the first in the beginning of what would become trend, started by the type of shoe that was available from a shoe manufacture. It was the shape of the early manufactured keg shoes where it all began, trend setting.
As new manufacturing techniques developed, manufactures began producing shoes in a variety of new shapes. The first new style shoes to be offered were front and hind pattern shoes which came out of Europe. American farriers who at the time were taking flack for setting the trend of long toe and low heels, this said to help increase stride, were quick to embrace this convenient way of addressing breakover. This ws the beginning of a new trend, ont that may prove to be just as damaging to today's horse as long toes and under run heels.
It was the hind pattern shoe that really changed things. The hind pattern shoe was the first readily available shoe to be offered with a square toe. Quickly manufacturers introduced hind shoes with ready-made side clips, and front shoes with toe clips. The front shoe pattern was often rounder than the standard keg shoe that many of the farriers were using at the time. This may have been why some farriers began using hind patterns on the fronts of the horse; this proving to be a simple way of providing a square toe to the front foot, making fitting easier.
Twenty years ago, the square toed horseshoe, was more often viewed as a remedial or corrective type horseshoe. It was not often used as a keg shoe. Prior to being able to purchase the square-toed shoe, the square toe needed to be forged.
Over about a ten year period pattern shoes flooded the market.
American based companies began producing front pattern shoes that were not as round as the European type pattern shoes. These new patterns more closely resembled the traditional keg shoe. With increase in production came price reductions, making it more economical to purchase clipped shoes, rather than forging them. In the mid nineties Eventer-type shoes were introduced. These pattern shoes had a rolled cross section, claiming to aid in breakover, they also came in front and hind patterns.
About the mid nineties, we say increase in the use of the Natural Balance Shoe (NBS), which was fashioned after the footprint of the feral horse. It too had square toe and came in front and hind patterns. Each time a new shoe was introduced, it was accompanied by claims that the shoe aided breakover, and / or provided needed heel support. This is still true today, of most newly developed horseshoes.
So where is all this going?
To the point, shoe manufacturers have been setting trends that influence the way the farrier addresses the foot.
Recently, I have compiled research on a little understood malady that affects many of today's horses, the black hole seedy toe.
Our research began in 2001, the opening of the International Institute of Equine Podiatry. Inc., since which time we have examined over 1200 hoof cadaver specimens. We observed a dramatic increase in the occurrence of black hole-type seedy toe. Investigation has now provided evidence that suggest that various trimming and shoeing trends could be that cause for this increase in the incidence of this malady.
Our research has shown that more often that not, the black hole is evidence of a Hyper Keratinized Horn mass, located at the creana marginalis of the coffin bone (seen as a notch in the coffin bone). One theory suggests that an abnormal increase in the size of the creana marginalis was likely due to a compromised blood supply. Further studies implicate that the cause of manifestation of the HKH mass at the site of the creana marginalis is stress.
Biopsies were taken from twenty (20) specimen masses and prepared for examination. Opinions gathered from several pathologists were unanimous; the HKH mass was the result of hyperplasia of epithelial cells with keratinization, this likely caused by stress.
Microphotographs of tissue samples from the masses often showed elongated secondary epidermal laminae (SEL); this occurrence has been associated with changes in response to stress.
Measurements were taken of the solar foot print of the twenty specimens from which the masses were harvested. This showed us that the greater the variance in balance, the larger the mass often appeared. The most widespread causes of imbalance were the under run heel, and the creation of excessively short breakover.
The research has allowed us to develop a number of hypotheses.
1. The theory that abnormal increases in the size of the creana marginalis of the coffin bone is the result of a compromised blood supply due to long toes is no longer tenable.
2. Research supports the theory that abnormal increases in the size of the creana marginalis may be nature's way of increasing surface area in response to increased stress.
3. Evidence supports the theory that stress and the resulting HKH mass is the cause of the enlargement of the creana marginalis of the coffin bone.
Our conclusion are that trends perpetuated by various shoe types and various trimming techniques proposed over the past decade, are responsible for an increase in the development of the HKH mass, and the resulting black hole seedy toe. The majority of the proposed techniques promote dramatic reduction in breakover, which can lead to improper positioning of the coffin bone within the hoof capsule. There are a number of factors that have surfaced, many of which are the result of improper trimming.
What this all means to those of you that have chosen to go shoeless with your horse, is that you should look more closely at the way your horse is being trimmed.
Here are some recommendations that may help in preventing mass growth, and may aid in stabilization of an existing condition.
- Aggressive rolling of the wall at the toe should be avoided. Avoid dubbing the wall or rockering of the toe into or palmar of the whiteline.
- Avoid ground parallel coffin bones.
- Do not lower the heels to the viable (live) sole at the angle of the bar/wall (often results in ground parallel coffin bone).
- Under run heels do not justify radical break over placement.
- Treating of black hole seedy toe with topical solutions or soaks will do little to remedy the problem.
- Balance should be addressed and any cause of stress relieved; this does not mean excessive removal of material at the toe.
This new evidence bring into question the Universal Sole Trim theory, Natural Balance trim, and any other method that may disrupt balance, causing stress at the site of the creana marginalis (tip of coffin bone).
There are far more studies to be done. Immunology studies are underway, and further research into the cause of the HKH mass is ongoing.